Investigating the phase diagram-ionic conductivity isotherm relationship in aqueous solutions of common acids: hydrochloric, nitric, sulfuric and phosphoric acid.

The relationship between phase diagram features around the solid-liquid equilibrium region and ionic conductivity in aqueous solutions is not well understood over the whole concentration range as is the case for acidic aqueous solutions. In this work, we have studied the ionic conductivity (κ) as a function of molar fraction (x) and temperature (T) for four acid/water solutions namely, monoprotic hydrochloric acid (HCl) and nitric acid (HNO3), diprotic sulfuric acid (H2SO4) and triprotic phosphoric acid (H3PO4) along with their binary phase diagrams. The connection between the main features of the phase diagrams and the trends in the ionic conductivity isotherms is established with a new insight on the two pertinent dominant conductivity mechanisms (hopping and vehicular). Ionic conductivity at different temperatures were collected from literature and fitted to reported isothermal (κ vs. x) and iso-compositional (κ vs. T) equations along with a novel semi-empirical equation (κ = f (x, T)) for diprotic and triprotic acids. This equation not only has the best fit for acids with different valency; but also contains four parameters, less than any other similar equation in literature. This work is one of few that advances the understanding of the intricate relationship between structure and ionic transport in various acidic aqueous solutions.

Catalytic Asymmetric Construction of α,α-Diaryl Aldehydes via Oxo-Hydroarylation of Terminal Alkynes.

Chiral aldehydes containing a tertiary stereogenic center are versatile building blocks in organic chemistry. In particular, such structural motifs bearing an α,α-diaryl moiety are very challenging scaffolds and their efficient asymmetric synthesis is not reported. In this work, a phosphoric acid-catalyzed enantioselective synthesis of α,α-diaryl aldehydes from simple terminal alkynes is presented. This approach yields a wide range of highly enolizable α,α-diaryl aldehydes in good yields with excellent enantioselectivities. Facile transformations of the products, as well as an efficient synthesis of bioactive molecules, including an effective anti-smallpox agent and an FDA-approved antidepressant drug (+)-sertraline, are demonstrated.

[Adsorption Properties of Magnetic Phosphorous Camellia Oleifera Shells Biochar to Sulfamethoxazole in Water].

Magnetic phosphorous biochar （MPBC） was prepared from Camellia oleifera shells using phosphoric acid activation and iron co-deposition. The materials were characterized and analyzed through scanning electron microscopy （SEM）， X-ray diffractometry （XRD）， specific surface area and pore size analysis （BET）， Fourier infrared spectroscopy （FT-IR）， and X-ray photoelectron spectroscopy （XPS）. MPBC had a high surface area （1 139.28 m2·g-1） and abundant surface functional groups， and it could achieve fast solid-liquid separation under the action of an external magnetic field. The adsorption behavior and influencing factors of sulfamethoxazole （SMX） in water were investigated. The adsorbent showed excellent adsorption properties for SMX under acidic and neutral conditions， and alkaline conditions and the presence of CO32- had obvious inhibition on adsorption. The adsorption process conformed to the quasi-second-order kinetics and Langmuir model. The adsorption rate was fast， and the maximum adsorption capacity reached 356.49 mg·g-1. The adsorption process was a spontaneous exothermic reaction， and low temperature was beneficial to the adsorption. The adsorption mechanism was mainly the chemisorption of pyrophosphate surface functional groups （C-O-P bond） between the SMX molecule and MPBC and also included hydrogen bonding， π-π electron donor-acceptor （π-πEDA） interaction， and a pore filling effect. The development of MPBC adsorbent provides an effective way for resource utilization of waste Camellia oleifera shells and treatment of sulfamethoxazole wastewater.

Optimizing Typha biochar with phosphoric acid modification and ferric chloride impregnation for hexavalent chromium remediation in water and soil.

Considering the persistent and covert nature of heavy metal soil contamination, the sustainable development of ecological environments and food safety is at significant risk. Our study focuses on remediating soils contaminated with chromium (Cr); we introduce an advanced remediation material, iron oxide phosphoric acid-loaded activated biochar (HFBC), synthesized through pyrolysis. This HFBC displays greater microporosity, fewer impurities, and enhanced efficiency for the remediation process. Our research utilized a comprehensive set of analytical techniques, including Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and X-ray Photoelectron Spectroscopy (XPS), alongside adsorption studies to elucidate the Cr removal mechanism. The effectiveness of HFBC in remediation was influenced by several factors: the pH level, dosage of HFBC, the initial concentration of Cr, and the ambient temperature. Our results indicated an optimal chromium (VI) adsorption capacity of 55.5 mg/g by HFBC at a pH of 6.0 and a temperature of 25 °C, with the process adhering to the pseudo-second-order kinetic model and the Langmuir adsorption isotherm, thus suggesting spontaneity in the uptake method. Moreover, this mechanism encompasses both adsorption and reduction reactions. Using HFBC in pot experiments with cabbage indicated not only an increase in soil pH and cation exchange capacity (CEC), but also a surge in bacterial community abundance. Significant reductions in bioavailable chromium were also recorded. Interestingly, HFBC addition bolstered the growth of cabbage, while concurrently diminishing chromium accumulation within the plant, particularly notable as the HFBC application rate increased. In summation, the HFBC produced in our study has demonstrated convincing efficacy in removing chromium from aqueous solutions and soil. Moreover, the positive agronomic implications of its use, such as enhanced plant growth and reduced heavy metal uptake by plants, indicate its high potential for operational value in the domain of environmental remediation of heavy metals.

Construction of Successive Proton Conduction Channels to Accelerate the Proton Conduction Process in Flexible Proton Exchange Membranes.

Successive proton conduction channels are constructed with the spin coating method in flexible proton exchange membranes (PEMs). In this research, phosphoric acid (PA) molecules are immobilized in the multilayered microstructure of Kevlar nanofibers and polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) polymer molecular chains. As a result, successive proton conduction channels can accelerate the proton conduction process in the prepared membrane with the multilayered microstructure. Additionally, the microstructure fractures of the composite membranes from the external force of folding and stretching operations are modified by the inner PA molecules. Notably, numerous PA molecules are further combined through formed intermolecular hydrogen bonding. The stretched membrane absorbs more PA molecules owing to the arrangement of PA molecules, Kevlar nanofibers, and SEBS molecular chains. The stretched membrane thus exhibits the enhanced proton conduction ability, such as the through-plane proton conductivity of 1.81 × 10-1 S cm-1 at 160 °C and that of 4.53 × 10-2 S cm-1 at 120 °C lasting for 600 h. Furthermore, the tensile stress of PA-doped stretched membranes reaches (3.91 ± 0.40)-(6.15 ± 0.43) MPa. A single proton exchange membrane fuel cell exhibits a peak power density of 483.3 mW cm-2 at 120 °C.

Sustainable production of activated carbon from indigenous Acacia etbaica tree branches employing microwave induced and low temperature activation.

Growing demand for activated carbon as an efficient and cost effective means of treating environmental pollution necessitates the economical production of good quality activated carbon. It is possible if it is done using low cost precursor materials and economical production methods. In the present study, two types of activated carbon were produced from Acacia etbaica tree branches while employing phosphoric acid as an activating agent. The first sample underwent carbonization by microwave irradiation (AC-MWI), while the second sample was carbonised in a furnace (AC-CA). Characterization of the formed activated carbon samples was executed by proximate and ultimate analysis adopting standard ASTM procedures. In addition to the elemental analysis, hardness, bulk density, pH, moisture and ash content, surface morphology, BET specific surface area, pore volume, volatile matter, fixed carbon, and iodine number were determined. Characteristics of both activated carbon samples were compared with the characteristics of activated carbon available in the literature and activated carbon available commercially in the market. The comparison revealed that the characteristics of the produced activated carbon samples was well comparable with the activated carbons produced from other species of Acacia tree and activated carbon available commercially. Results showed that the produced activated carbon demonstrated high activation efficiency of 39.8% and 48.7% for AC-CA and AC-MWI, respectively. Furthermore, AC-MWI has a BET specific surface area higher than that of AC-CA (1065 m2/g and 773 m2/g respectively). It was found that the BET specific surface area and pore volume of AC-MWI was higher by 37.7% and 12.7%, respectively, as compared to the values acquired for AC-CA. Additionally, activated carbon could be produced by microwave irradiation in about 48% less time as compared to traditional low temperature heating. The adsorption study of produced the activated carbon was performed utilising methylene blue (MB) as a contaminant, and the data was fitted to Langmuir, Freundlich, as well as Harkins-Jura isotherm showing comparable correlation. However, Freundlich isotherm was found to be the best to elaborate the MB adsorption on the produced activated carbon. The results confirmed the viability of microwave irradiation in producing good quality activated carbon from Acacia etbaica tree branches, which demonstrated comparable characteristics with commercially available activated carbon. The strategy could be beneficial for the country in order to produce high quality activated carbon and strengthen its self-reliance.

Rapid removal of Rhodamine B by phosphoric acid-modified activated carbon derived from rape straw.

A series of activated carbon was obtained from rape straw by chemical modification with phosphoric acid (H3PO4). The activated carbon was characterized and the adsorption capacity for Rhodamine B (RhB) from water was analysed. The SEM images showed that PRC-40 is a porous material and the BET analysis revealed a high surface area of 1720 m2/g with the coexistence of micropores and mesopores. The FTIR spectra determined the presence of oxygenated functional groups at its surface. The XPS spectra revealed that the content of carboxyl and metaphosphate groups in the modified activated carbon significantly increased, and this is conducive to the adsorption reaction. The XRD pattern showed the amorphous nature of carbon. The effect of significant parameters, such as the concentration of H3PO4 for modification and pH value, has been discussed. The kinetic data showed that the pseudo-second-order model is predominant. Besides, the Langmuir model was compatible well with the equilibrium data, and the maximum adsorption capacity of the activated carbon modified by H3PO4 was 2882.84 mg/g. Therefore, agricultural waste and rape straw can be used to prepare effective adsorbents for the application with the removal of dye from wastewater.

Effective chromium mitigation using phosphorous doped bio carbon electrode via capacitive deionisation.

Capacitive deionisation (CDI) is an emerging eco-economic water reclamation technology that can remove inorganic salts and heavy metals. Biomass-derived carbon electrodes have attracted the scientific communities in recent years due to their economic feasibility and sustainability. However, electrochemical performance needs to be improved to achieve durability and reusability. Hence, the present study develops rice straw-derived phosphorous-doped (P-doped) carbon as an electrode for mitigating Cr(VI) ions. Phosphorus doping of biocarbon electrodes enhances their electrochemical properties, including increased electrical conductivity, improved charge storage capacity, and enhanced ion adsorption capabilities. Here, Phosphoric acid plays a dual role of activation and doping that enhances the physico-electrochemical properties. The synthesised material was found to be P-doped carbon with better pore distribution, which was confirmed through FESEM-EDX analysis. Further, the physicochemical properties of the electrode material are enriched with carbon and possess an enhanced surface area of 753 m2/g. The cyclic voltammetry shows the specific capacitance of 67 F/g for the Cr(VI) ions, which was found to be 15 times more than the non-doped carbon. CDI studies were performed with optimisation of operational parameters and found that mitigation of Cr(VI) ions was efficient at pH 2 for the applied voltage of 2V. The electrode's performance with real-time chrome wash effluent confirms its potentiality and has better scope upon optimisation. The experimental data fits well with pseudo first-order kinetics, which ensures the nature of electrosorption is physisorption.

Achieving 1060 mW cm-2 with 0.6 mg cm-2 Pt Loading Based on Imidazole-Riched Semi-Interpenetrating Proton Exchange Membrane at High-Temperature Fuel Cells.

Enhancing phosphoric acid (PA) doping in polybenzimidazole (PBI) membranes is crucial for improving the performance of high-temperature proton exchange membrane fuel cells (HT-PEMFCs). However, excessive PA uptake often leads to drawbacks such as PA loss and compromised mechanical properties when surpassing PA capacity of PBI basic functionality. Herein, a new strategy that integrates high PA uptake, mechanical strength, and acid retention is proposed by embedding linear PBI chains into a crosslinked poly(N-vinylimidazole) (PVIm) backbone via in-situ polymerization. The imidazole (Im)-riched semi-interpenetrating polymer network (sIPN) membrane with high-density nitrogen moieties, significantly enhancing the PA doping degree to 380% shows an excellent conductivity (0.108 S cm-1 ). Meanwhile, the crosslinking structure in the sIPN membrane ensures adequate mechanical properties, low hydrogen permeability, and a relatively low swelling ratio. As a result, the single cell based on the membrane achieves the highest power density of 1060 mW cm-2 with a low Pt loading (0.6 mg cm-2 ) up to now and exhibits excellent fuel cell stability.

MATEO: intermolecular α-amidoalkylation theoretical enantioselectivity optimization. Online tool for selection and design of chiral catalysts and products.

The enantioselective Brønsted acid-catalyzed α-amidoalkylation reaction is a useful procedure is for the production of new drugs and natural products. In this context, Chiral Phosphoric Acid (CPA) catalysts are versatile catalysts for this type of reactions. The selection and design of new CPA catalysts for different enantioselective reactions has a dual interest because new CPA catalysts (tools) and chiral drugs or materials (products) can be obtained. However, this process is difficult and time consuming if approached from an experimental trial and error perspective. In this work, an Heuristic Perturbation-Theory and Machine Learning (HPTML) algorithm was used to seek a predictive model for CPA catalysts performance in terms of enantioselectivity in α-amidoalkylation reactions with R2 = 0.96 overall for training and validation series. It involved a Monte Carlo sampling of > 100,000 pairs of query and reference reactions. In addition, the computational and experimental investigation of a new set of intermolecular α-amidoalkylation reactions using BINOL-derived N-triflylphosphoramides as CPA catalysts is reported as a case of study. The model was implemented in a web server called MATEO: InterMolecular Amidoalkylation Theoretical Enantioselectivity Optimization, available online at: https://cptmltool.rnasa-imedir.com/CPTMLTools-Web/mateo . This new user-friendly online computational tool would enable sustainable optimization of reaction conditions that could lead to the design of new CPA catalysts along with new organic synthesis products.

The effect of the use of the deproteinization agent hypochlorous acid and two different pit and fissure sealant self-adhesive flowable composites upon its bonding with the enamel.

This study evaluates the effect of the deproteinization agents hypochlorous acid and sodium hypochlorite upon the bonding of the two different pit and fissure sealant, self-adhesive flowable composites with the enamel. Thirty-six third molars were randomly divided into six different groups. The groups were formed as follows: Group 1: 37% phosphoric acid + VertiseTM Flow; Group 2: 200 ppm hypochlorous acid + 37% phosphoric acid VertiseTM Flow; Group 3: 5.25% sodium hypochlorite + 37% phosphoric acid + VertiseTM Flow; Group 4: 37% phosphoric acid + Constic; Group 5: 200 ppm hypochlorous acid + 37% phosphoric acid + Constic; Group 6: 5.25% sodium hypochlorite + 37% phosphoric acid + Constic. In each group, samples were obtained that were rectangular prisms in shape (n = 12). Groups to which a deproteinization agent was applied (Groups 2, 3 and 5, 6) showed statistically higher microtensile bonding strength than Group 1, Group 4. There was no statistically significant difference in terms of microtensile bonding strength values between the Groups 3 and the Group 6. The study found that the groups to which deproteinization agents were applied had statistically higher microtensile bonding strength values compared with those groups to which acid and fissure sealants were applied. In this study, it was concluded that the use of fissure-sealing self-adhesive flowable composites after acid application to permanent tooth enamel provides an acceptable bond strength given the limitations of in vitro studies. In line with the results obtained, it was observed that in addition to the removal of the inorganic structure with the application of acid, the removal of the organic structure with the use of deproteinization agent increased the bond strength to the enamel.

Organocatalytic Enantioselective Synthesis of Seven-Membered Ring with Inherent Chirality.

Inherent chirality is used to describe chiral cyclic molecules devoid of central, axial, planar, or helical chirality and has tremendous applications in chiral recognition and enantioselective synthesis. Catalytic and divergent syntheses of inherently chiral molecules have attracted increasing interest from chemists. Herein, we report the enantioselective synthesis of inherently chiral tribenzocycloheptene derivatives via chiral phosphoric acid (CPA)-catalyzed condensation of cyclic ketones and hydroxylamines. This chemistry paves the way to accessing the less stable derivatives of 7-membered rings with inherent chirality. A series of chiral tribenzocycloheptene oxime ethers was synthesized in good yields (up to 97 %) with excellent enantioselectivities (up to 99 % ee).

Polyvinylpyrrolidone as a primer for resin-dentin bonding.

OBJECTIVE: This study aimed to investigate the effects of polyvinylpyrrolidone (PVP)-containing primer (PCP) on dentin bonding. METHODS: PVP and anhydrous ethanol were used to prepare the PCPs, which were prepared at concentrations of 0.5%, 1%, and 2% (w/v). These PCPs were subsequently applied to the dentin surface, denoted as E1, E2, and E3, respectively. In the control group, no primer was applied. Following the treatment, the dentin surfaces were subjected to analysis using Fourier-transform infrared spectroscopy (FTIR), and the micro-tensile bond strength (MTBS) was evaluated. The failure mode, nanoleakage, and bonding longitudinal section were observed utilizing scanning electron microscopy (SEM). Additionally, the effect of PCPs on matrix metalloproteinases (MMPs) activity was analyzed through an in situ zymography test. Data were subjected to statistical analysis using ANOVA tests (α = 0.05). RESULTS: Significant alterations in the infrared resonances associated with collagen cross-linking within the collagen matrix were observed across all PCP groups. The application of PCP demonstrated a noteworthy enhancement in micro-tensile bond strength (MTBS) compared to group C (p < 0.05). Notably, group C exhibited the lowest MTBS (41 ± 7.7 MPa), whereas group E2 demonstrated the highest MTBS (66 ± 11.9 MPa). Even after undergoing aging, the MTBS of the PCP groups remained superior to that of group C (p < 0.05). The resin tag length in the PCP groups was found to be greater than that of group C, and the occurrence of nanoleakage was comparatively lower in the PCP groups, both before and after aging. Additionally, PCP exhibited a dose-dependent inhibition of matrix metalloproteinases (MMPs) activity, which was statistically significant (p < 0.05). CONCLUSIONS: The utilization of PCP Primer exhibits notable enhancements in bond strength, mitigates nano-leakage, and suppresses enzyme activity within the hybrid layer.

Thermophysical properties and bonding with composite resin of premixed mineral trioxide aggregate for use as base material.

Dental bases require low thermal conductivity and good mechanical properties, such as bonding with composite resins. This study aims to elucidate the physicochemical properties of premixed mineral trioxide aggregate (MTA) for its suitability as a dental base and to explore the optimal adhesive strategy with composite resin. The thermal conductivity and compressive strength of this premixed MTA are 0.12 W/(m•K) and 93.76 MPa, respectively, Which are deemed adequate for its application as dental base. When bonded to composite resin, the use of 37% phosphoric acid etching before applying the Clearfil SE bond significantly reduced the bonding strength between composite resin and premixed MTA. This was because the compressive strength and Vickers hardness of premixed MTA decreased, and tricalcium silicate was dissolved from the surface during acid etching. Therefore, it is recommended to avoid using 37% phosphoric acid etching when bonding premixed MTA and composite resin as a dental base.

Porous polyvinyl fluoride coated cellulose beads for efficient removal of Cd(II) from phosphoric acid.

In order to enhance the removal of cadmium from phosphoric acid, it is imperative to explore novel resources that may be utilized for the development of highly effective and environmentally sustainable adsorbents. Cellulose beads are composed of naturally occurring polysaccharide fibers and find extensive utilization across several industrial sectors and applications. Within this framework, this research paper presents a green and simple method for producing porous cellulose beads using date palm fibers as the preferred raw material. The innovation lies in immersing the obtained cellulose beads in a Polyvinyl fluoride (PVDF)/N,N-dimethylformamide (DMF) suspension as a coating polymer with different concentrations (2.5, 5, 10 %) to maintain their stability in an acidic environment. The surface of cellulose/PVDF beads were subjected to multiple characterizations like Fourier transform infrared (FTIR) spectroscopy, Scanning electron microscopy (SEM), Thermogravimetric analysis (TGA), size distribution then pH stability confirming that the coating has been perfectly achieved and conserved well the shape of the beads. The coated cellulose/PVDF-2.5 % underwent evaluation by the process of batch adsorption experiments while different parameters were varied including contact time (5, 10, 20, 30, 60, 90 min), temperature (25, 35, 45 and 55 °C), and adsorbent mass (20, 40, 60, 80 and 100 mg). The obtained ICP data showed that the adsorption rate of Cd (II) from phosphoric acid medium decreased while increasing both temperature from 25 to 55 °C and contact time from 5 to 90 min while adding more adsorbent dosage from 20 to 100 mg enhanced the removal percentage. The cellulose/PVDF-2.5 % was more effective with an adsorption capacity equal to 3.4998 mg/g at optimal conditions including 25 °C as the temperature after 5 min as contact time and by adding a mass 100 mg of the biosorbent while the pH = 2 of the solution is maintained the same. The examined material's adsorption processes proved to be exothermic and non-spontaneous, and it proved that the pseudo-second-order model provided the best match for the cellulose/PVDF-2.5 % beads kinetics data. Furthermore, the cellulose beads exhibited exceptional reusability for up to four repeated cycles without undergoing desorption. The present study offers a viable approach for producing environmentally sustainable biomass-derived adsorbents. Additionally, the study validates the potential of cellulose/PVDF beads as an intriguing material for phosphoric acid decadmiation.

The ultramicropore biochar derived from waste distiller's grains for wet-process phosphoric acid purification: Removal performance and mechanisms of Cr(VI).

Solid waste and heavy metal pollution are long-term and challenging subjects in the field of environmental engineering. In this study, we propose a sustainable approach to "treating waste with waste" by utilizing the ultramicropore biochar derived from solid waste distiller's grains as a means to remove Cr(VI) from simulated wastewater and wet phosphoric acid. The biochar prepared in this research exhibit extremely high specific surface areas (up to 2973 m2/g) and a well-developed pore structure, resulting in a maximum Cr(VI) adsorption capacity of 426.0 mg/g and over 99% removal efficiency of Cr(VI). Furthermore, the adsorbent can be reused for up to eight cycles without significant reduction in its Cr(VI) adsorption performance. Mechanistic investigations suggest that the exceptional Cr(VI) adsorption capacity can be attributed to the synergistic effect of electrostatic interaction and reduction adsorption. This study offers an alternative approach for the resource utilization of solid waste distiller's grains, and the prepared biochar holds promise for the removal of Cr(VI) from wastewater and wet-process phosphoric acid.

Dual-Proton Conductor for Fuel Cells with Flexible Operational Temperature.

The properties of proton conductors determine the operating temperature range of fuel cells. Typically, phosphoric acid (PA) proton conductors exhibit excellent proton conductivity owing to their high proton dissociation and self-diffusion abilities. However, at low temperatures or high current densities, water-induced PA loss causes rapid degradation of cell performance. Maintaining efficient and stable proton conductivity within a flexible temperature range can significantly reduce the start-up temperature of PA-doped proton exchange membrane fuel cells. In this study, a dual-proton conductor composed of an organic phosphonic acid (ethylenediamine tetramethylene phosphonic acid, EDTMPA) and an inorganic PA is developed for proton exchange membranes. The proposed dual-proton conductor can operate within a flexible temperature range of 80-160 °C, benefiting from the strong interaction between EDTMPA and PA, and the enhanced proton dissociation. Fuel cells with the EDTMPA-PA dual-proton conductor showed excellent cell stability at 80 °C. In particular, under the high current density of 1.5 A cm-2 at 160 °C, the voltage decay rate of the fuel cell with the dual-proton conductor is one-thousandth of that of the fuel cell with PA-only proton conductor, indicating excellent stability.

Thin Films of a Complex Polymer Compound for the Inhibition of Iron Alloy Corrosion in a H3PO4 Solution.

The etching of iron alloy items in a H3PO4 solution is used in various human activities (gas and oil production, metalworking, transport, utilities, etc.). The etching of iron alloys is associated with significant material losses due to their corrosion. It has been found that an efficient way to prevent the corrosion of iron alloys in a H3PO4 solution involves the formation of thin complex compound films consisting of the corrosion inhibitor molecules of a triazole derivative (TrzD) on their surface. It has been shown that the protection of iron alloys with a mixture of TrzD + KNCS in a H3PO4 solution is accompanied by the formation of a thin film of coordination polymer compounds thicker than 4 nm consisting of TrzD molecules, Fe2+ cations and NCS-. The layer of the complex compound immediately adjacent to the iron alloy surface is chemisorbed on it. The efficiency of this composition as an inhibitor of iron alloy corrosion and hydrogen bulk sorption by iron alloys is determined by its ability to form a coordination polymer compound layer, as experimentally confirmed by electrochemical, AFM and XPS data. The efficiency values of inhibitor compositions 5 mM TrzD + 0.5 mM KNCS and 5 mM TrzD + 0.5 mM KNCS + 200 mM C6H12N4 at a temperature of 20 ± 1 °C are 97% and 98%, respectively. The kinetic parameters of the limiting processes of hydrogen evolution and permeation into an iron alloy in a H3PO4 solution were determined. A significant decrease in both the reaction rate of hydrogen evolution and the rate of hydrogen permeation into the iron alloy by the TrzD and its mixtures in question was noted. The inhibitor compositions 5 mM TrzD + 0.5 mM KNCS and 5 mM TrzD + 0.5 mM KNCS + 200 mM C6H12N4 decreased the total hydrogen concentration in the iron alloy up to 9.3- and 11-fold, respectively. The preservation of the iron alloy plasticity in the corrosive environment containing the inhibitor under study was determined by a decrease in the hydrogen content in the alloy bulk.

Effective adsorption of bisphenol A from aqueous solution using phosphoric acid-assisted hydrochar.

Sycamore leaf biochar (PSAC) was prepared by a two-step phosphoric acid-assisted hydrothermal carbonization combined with a short-time activation method. The characterization results showed that the introduction of phosphoric acid molecules and thermal activation resulted in a substantial increase in the specific surface area (994.21 m2/g) and microporous capacity (0.307 cm3/g) of PSAC. The batch adsorption results showed that the adsorption process of PSAC on bisphenol A (BPA) was best described by the pseudo-second-order kinetic model and Sips isothermal model, with a maximum adsorption capacity of 247.42 mg/g. The adsorption of BPA onto PSAC was determined to be a spontaneous endothermic process. The equilibrium adsorption capacity of PSAC exhibited an upward trend with increasing initial BPA concentration and temperature while decreasing with higher adsorbent dosage and pH value. Coexisting cations and humic acids in water have little impact on the adsorption performance of PSAC for BPA. The adsorption mechanism of BPA by PSAC was mainly governed by pore filling and hydrogen bonding interactions, π-π interactions, and intraparticle diffusion. Furthermore, PSAC demonstrated good reusability by its sustained adsorption capacity of BPA, which remained at 82.6% of the initial adsorption capacity even after four adsorption-desorption cycles. These findings highlight the potential of utilizing low-cost sycamore leaf biochar as an effective adsorbent for the removal of the endocrine disruptor BPA.

Melt Spinning Process Optimization of Polyethylene Terephthalate Fiber Structure and Properties from Tetron Cotton Knitted Fabric.

Polyester/cotton fabrics with different proportions of Tetron Cotton, TC (35% Cotton/65% PET), and Chief Value Cotton, CVC (60% Cotton/40% PET), were investigated by removing the cotton component under various phosphoric acidic conditions including the use of cellulase enzymes. The remaining polyethylene terephthalate (PET) component was spun using the melt spinning method. Only 85% H3PO4-Enz_TC could be spun into consistent filament fibers. The effects of Acid-Enz TC (obtained from a powder preparation of 85% H3PO4-Enz_TC) at different weight amounts (1, 2, 5, and 10 %wt) blending with WF-rPET powder prepared by white recycled polyester fabric were evaluated for fiber spinnability at different winding speeds of 1000 and 1500 m/min. The results revealed that recycled PET fiber spun by adding Acid-Enz_TC up to 10 %wt gave uniformly distributed filament fibers. A comparative study of the physical, thermal, and mechanical properties also investigated the relationship between the effect of Acid-Enz_TC and the structure of the obtained fibers. Acid-Enz_TC:WF-rPET (5:95) was the optimal ratio. The thermal values were analyzed by DSC and TGA and crystallinity was analyzed by XRD, with mechanical strength closed to 100% WF-rPET. The FTIR analysis of the functional groups showed the removal of cotton from the blended fabrics. Other factors such as the Acid-Enz_TC component in WF-rPET, extraction conditions, purity, thermal, chemical, and exposure experiences also affected the formability and properties of recycled PET made from non-single-component raw materials. This study advanced the understanding of recycling PET from TC fabrics by strategically removing cotton from polyester-cotton blends and then recycling using controlled conditions and processes via the melt spinning method.